Shanmon Brand 388t Backhoe Loader 2ton 3ton Hot Sale in Russia

• Customization: Available
• After-sales Service: Support
• Warranty: 1year
• Model NO.: 388T
• Condition: New
• Rated Load: 1-3t
• Transmission: Power
• Load and Unload Mode: Front Discharge
• Walking Mode: Wheeled
• Type: Small Loader
• Tipping Load: 2500kg
• Operating Weight: 10500kg
• Rated Speed: 2500rpm
• Maximum Speed: 14km/H
• Hydraulic Flow Rate: 62.5L/Min
• Maximum Operating Height: 3878mm
• Bucket Hinge Pin Height: 3057mm
• Cabin Top Height: 1960mm
• Transport Package: Standard Package
• Specification: 6420*2530*3120 mm
• Trademark: sinomada
• Origin: China
• HS Code: 8401200000
• Production Capacity: 500PCS/Year

Product Description

Product Description

1. The 388T is a new multi-function engineering machine that gathers the loading and excavating in the integral whole machine.

2. It is the new generation model of development based on the same kind of product technique in domestic and international.

3. Adopted four-wheel drive, hydraulic torque converter, hydraulic steering system, hydraulic.

4. It is extensively used in road maintenance, farms, and developments, getting clay for making brick, piping builds, cable builds, parking virescence, and the excavating of the road open to dig, and breaking up. etc.

5. This machine has the characteristics of the Yuchai engine: low noise, low exhaust gas, low west, green environmental protection, driving motive, and good reliability.

6. The spirit valve control takes the type brake system and the parking brake system to move two units as one, when there is trouble in the gas brake system, it can make time brake automatically, so it is more safety.
 

The Main Performance Parameter of Backhoe Loader 388H
Overall Weight	8200KG	Final Reducer	Single Stage Final Reducer
Transport Dimension		Rated Loader of Axle	4/18.5t
L*W*H	5920*2250*3763mm	Transmission System
Wheel base	2200mm	Torque Converter
Min. Ground Clearance	300mm	Model	YJ280
Bucket Capacity	1.0m3	Type	Single-stage Three Elements
Breakout Force	55KN	Max. Efficiency	84.4%
Loading Lifting Capacity	2500KG	Inlet Pressure	0.4Mpa-0.55 Mpa
Bucket Dumping Height	2742mm	Outlet Pressure	1.2Mpa-1.5 Mpa
Bucket Dumping Distance	1062mm	Cooling Method	Oil-cooling Pressure Circulation
Digging Depth	52mm	Gearbox
Backhoe Capacity	0.3 m3	Type	Fixed Shaft Power Transmission
Max. Digging Depth	4082mm	Oil Pressure of Clutch	1373Kpa-1569 Kpa
Swing Angle of backhoe	190o	Gears	F2/R2
Max. Pulling Force	39KN	Max.Speed	22Km/h
Engine		Tyre
Model	Yuchai	Model	14-17.5/19.5L-24
Type	turbocharging four-stroke	Pressure of Front wheel	0.22 Mpa
Cylinder	4	Pressure of Back Wheel	0.22 Mpa
Rated Power	75KW	Brake System
Rated Speed	2400r/min	Service Brake	Air Over Oil Caliper Brake
Min. Fuel Consumption	218g/kw.h		External Type
Max.Torque	≥301.7N.M/1800r/min		Self-regulation
Displacement	4.5L		Self-balance
Steering System		Emergency Brake	Operation Power Implementing brake
Model of Steering Device	BZZ5-250		Manual Operation Power Terminating Brake
Steering Angle	±36o	Hydraulic System
Min. turning radius	6581mm	Digging Power of Excavator Grab	46.5KN
Pressure of the system	12Mpa	Digging Power of Dipper	31KN
Axle		Bucket Lifting Time	5.4S
Manufacturer	Feicheng Axle Factory	Bucket Lowering Time	3.1S
Main Transmission Type	Double Reduction	Bucket Discharge Time	2.0S
The parameters are subject to change without notice