| Customization: | Available |
|---|---|
| After-sales Service: | Provided |
| Warranty: | Provided |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Features:
1. Different length available.
2. Type: straight, gooseneck etc.
3. Axles can be 2,3 or 4 etc. Steering axle & hydraulic axle available.
4. Platform extendable.
5. Twist lock available.
6. Rear dump available.
7. Columns available.
We are a powerful trailer supplier in China,choosing us is a guarantee. After fully understanding and analyzing the traffic environment in different countries,different axles and suspensions are designed to suit different operations,and we can also provide double-deck trailers to load more cargo.
| semi trailer full cargo trailer | ||
| Trailer in front | Dimension: | 14m x 2.6m x 1.7m |
| Manganese steel girder: | 520mm high, 18-20mm upper and lower wings, 10mm vertical plate | |
| Side beam: | 18# channel steel | |
| Bottom plate: | 2mm thick checkered steel | |
| Axle: | Axle 16 tons, 3 axles | |
| Tires: | 13 1200 steel wire tires | |
| Steel ring: | 18 thick steel rings with 8.8 type and 13 pieces | |
| Leaf spring: | 10 pieces of weight (thickened) 16mm thick, (widened) 12cm wide | |
| Suspension: | widened type (12cm wide) 70 axles 35 pins, extra type for tie rods | |
| Outriggers: | 28 tons | |
| Pull pin: | 90# 1 interchangeable type | |
| Tool box: | factory equipped with a reinforced type | |
| Spare tire rack: | factory equipped with 2 reinforced types | |
| Brake cylinder: | 6 large double-chamber air chambers. Air tanks come in packs of 2 | |
| Brake air pipe: | use high-quality, thick pipe wall | |
| Paint: | Sandblasting to remove rust, spraying high-quality paint, yellow | |
| Others: | 1.8mm thick web reinforcement in the middle of the trailer girder. 2.The front block of the trailer is reinforced, a climbing ladder is installed, and a tarpaulin frame is installed. 3.Each trailer is equipped with 8 container locks. 4.The front and rear of the trailer, the middle beam is thickened with locks. 5.The saddle position at the rear of the trailer is reinforced. 6.The wire harness is thickened with high-quality copper core. 7.The whole car is equipped with LED lamps and electrical circuits. 8.A 90mm heavy-duty saddle is assembled at the rear of the trailer. |
|
| Middle Trailer | Dimension: | 5.6m x 2.55m x 1.71m |
| Girder: | 290mm variable neck, 18-20mm upper and lower wings, double 10mm web (two-layer vertical plate) | |
| Suspension: | 10mm thick and 12cm wide, 70 axis shaft. 35 pins | |
| Leaf spring: | 12 heavier pieces, widened and thickened | |
| Axle: | Axle 16 ton class 2 axles | |
| Rims: | 8.8 thick 18 rims 8pcs | |
| Tires: | 8 pcs of 1200 steel wire tires | |
| Brake cylinder: | 4 large double air chambers | |
| Traction shaft: | 90# welding type | |
| Fifth wheel: | Assemble a 90 plus saddle, (rear) | |
| Color: | yellow | |
| Others: | 1.The trailer beams and bevels are reinforced by welding steel plates. 2.The wire harness is thickened with copper wires, and the electrical circuit and lamps are fully equipped. |
|
| Rear Trailer |
Dimension: | 12.8m x 2.6m x 1.69m |
| Manganese steel girder: | 520mm high, 18-20mm upper and lower wings, 10mm vertical plate | |
| Side beam: | 18# channel steel | |
| Axle: | Axle 16 tons, 3 axles | |
| Tires: | 13 pcs of 1200 steel wire tires | |
| Steel ring: | 8.8 type 18 thick steel rings, 13 pieces | |
| Leaf spring: | 10 pieces of weight (thickened) 16mm thick, (widened) 12cm wide | |
| Suspension: | widened (12cm wide) thickened type 70 axles, 35 pins, thickened type for tie rods | |
| Outrigger: | 28 tons | |
| Pull pin: | 90# 1 interchangeable type | |
| Tool box: | factory equipped with a reinforced type | |
| Spare tire rack: | factory equipped with 2 reinforced types. | |
| Brake cylinder: | 6 large double-chamber air chambers. Air tanks come in packs of 2 | |
| Brake air pipe: | use high-quality, thick pipe wall | |
| Paint: | Sandblasting to remove rust, spraying high-quality paint, yellow | |
| Others: | 1.The base plate is 2mm thick checkered plate. 2.Reinforcement of the middle web of the trailer frame. 3.Reinforce the front block of the trailer, install a ladder to the upper side beam, and install a tarpaulin frame. 4.The trailer is equipped with 8 container locks. 5.Thickened square steel is used for the front, rear and middle lock beams of the trailer. 6.The wire harness is thickened with high-quality copper core. 7.The electric circuit of the LED lamps and lanterns of the whole vehicle is fully assembled. 8.Other configurations of the front and rear trailers are assembled according to the factory standard configuration. 9.The bolts and screws used in the bottom plate of the front and rear trailers are all high-strength and anti-loosening. |
|
){kind=link}