| Customization: | Available |
|---|---|
| After-sales Service: | Online Support and Other |
| Warranty: | One Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The XMR403 vibratory roller is a lightweight vibratory roller with a working mass of 4 tons. This machine is suitable for surface compaction and curb compaction in asphalt projects, cement projects, etc. It is also suitable for sub-base and base layers, sand and gravel materials.
It is the most ideal compaction machine for the compaction of materials in various parking lot constructions, compaction of roadways, sidewalks and bicycle lanes, as well as various road maintenance projects. It is characterized by small amplitude, high frequency, and its own sprinkler device. This vibratory roller can also cut off vibration and replace the static roller for road smoothing and compaction and pre-compaction of fill layers. This type of vibratory roller has double the compaction capacity compared to single-wheel vibratory rollers.
The machine uses Changchai ZN490B three-cylinder water-cooled engine, which is suitable for environments with temperatures above -35°C and altitudes below 2000m, and its emissions comply with National III standards.
The XMR403 vibratory roller absorbs and draws on the mature technology of X rollers. Through technological innovation and humanized design, it optimizes the appearance and structure of the entire machine, saves energy, reduces consumption, reduces noise, improves heat dissipation efficiency, comfort, economy and safety, and uses advanced technology Performance, extremely high reliability, good economy and adaptable design concepts enhance product competitiveness and better meet the market demand for highway, municipal and county road construction.
|
Operating Mass
|
4000 kg
|
|
Front Drum Static Linear Load
|
157 N/cm
|
|
Rear Drum Static Linear Load
|
157 N/cm
|
|
Model
|
Changchai ZN490B
|
|
Emission Regulation
|
Stage II
|
|
Rated Power
|
36 kW @ 2600 rpm
|
|
Vibration Frequency
|
60 Hz
|
|
Nominal Amplitude
|
0.41 mm
|
|
Centrifugal Force
|
42 kN
|
|
Drum Diameter
|
800 mm
|
|
Drum Width
|
1300 mm
|
|
Maximum Speed fwd
|
10.6 km/h
|
|
Theoretical Gradeability
|
30%
|
|
Min. Ground Clearance
|
348 mm
|
|
Wheelbase
|
1920 mm
|
|
Min. Outside Turning Radius
|
4362 mm
|
|
Overall Length
|
2720 mm
|
|
Overall Width
|
1428 mm
|
|
Overall Height
|
2819 mm
|
){kind=link}