|
| Model |
SEM917 |
| Operating Weight |
|
| Standard |
13,500 kg / 13,820 kg (With ROPS) |
| With Front & Rear Counterweight |
13,780 kg / 14,100 kg (With ROPS) |
| With Front Blade |
14,130 kg / 14,450 kg (With ROPS) |
| With Ripper+Front Blade |
14,410 kg / 14,730 kg (With ROPS) |
| Operating Specifications |
|
| Top Speed, Forward |
40 kph |
| Top Speed, Reverse |
29 kph |
| Min. Turning Radius |
7,300 mm |
| Articulation Angle, Left /Right |
20 ° |
| Gradeability |
30 ° |
| Wheelbase |
5,830 mm |
| Travel Speed, Forward |
5.3 / 8.2 / 13.3 / 20.3 / 29 / 40 kph |
| Travel Speed, Reverse |
5.3 / 13.3 / 29 kph |
| Drawbar Pull |
78 kN |
| Engine |
|
| Engine Manufacturer |
SDEC (ShangHai Diesel) |
| Engine Model |
SC7H170. 1G2B |
| Rated Power |
125 @ 2,200 kN @ RPM |
| Max. Torque |
750 @ 1,400 Nm @ RPM |
| Emission |
Tier 2 |
| Displacement |
6.5 L |
| Bore |
105 mm |
| Stroke |
124 mm |
| Number of Cylinders |
6 |
| Transmission |
|
| Type |
Converter, Powershift |
| Powershift Pressure |
1.3 ~ 1.7 Mpa |
| Forward / Reverse Gears |
6 / 3 |
| Parking Brake |
Spring Actuated, Air Released |
| Tandem Axle |
|
| Model |
ST18 |
| Differential |
No-Spin |
| Service Brake |
Caliper-Disc |
| Secondary |
Dual Circuit |
| Oscillation Front Up |
15° |
| Oscillation Front Down |
25° |
| Front Axle |
|
| Ground Clearance |
640 mm |
| Wheel Lean, Left / Right |
±18° |
| Max. Oscillation |
±16° |
| Steering Range, Left / Right |
±45° |
| Hydraulic System |
|
| Circuit Type |
Loading Sensing, PPPC |
| Pump Type |
Variable Piston |
| Max. Pump Output |
162.8 L / min |
| Max. System Pressure |
22 MPa |
| Standby Pressure |
2.0~2.2 MPa |
| Moldboard |
|
| Blade Width, Standard |
3,669 (12')mm (Ft) |
| Blade Width, Optional |
3,972 (13') mm (Ft) |
| Moldboard Height |
610 mm |
| Moldboard Thickness |
20 mm |
| Throat Clearance |
112 mm |
| Float Function |
Optional |
| Moldboard Sideshift, LH |
647 mm |
| Moldboard Sideshift, RH |
528 mm |
| Circle Centershift, LH |
512 mm |
| Circle Centershift, RH |
663 mm |
| Max. Blade Position Angle |
90 ° |
| Blade Tip, Forward |
40 ° |
| Blade Tip, Backward |
5 ° |
| Blade Cutting Angle |
24-69 ° |
| Max. Shoulder Reach outside of Tires, LH |
1,748 mm |
| Max. Shoulder Reach outside of Tires, RH |
1,912 mm |
| Max. Lift above Ground |
460 mm |
| Max. Cutting Depth |
725 mm |
| Service Refill Capacity |
|
| Fuel Tank |
218 L |
| Engine Oil |
17.5 L |
| Coolant |
37 L |
| Transmission |
17 L |
| Differential Case |
27 L |
| Tandem Case, Each Side |
50 L |
| Circle Drive, Non Slip Clutch |
2 L |
| Circle Drive, With Slip Clutch |
7 L |
| Hydraulic Oil Tank |
55 L |
| Main Optional Equipments |
|
| Mid Mounted Scarifier(MMS) / MMS Ready |
Circle Saver |
| Front Counterweight, 1000kg |
Rear Counterweight, 600kg |
| Blade Float |
Cold Start |
| Elec-Hydraulic Pin Puller |
High Profile ROPS Cab |
| Hydraulic Blade Tip |
Circle Drive with Slop Clutch |
| Front Blade / Front Blade Ready |
Rear Ripper / Rear Ripper Ready |
| Rear Fender |
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}