Promotion of 20Ton Crawler Excavator CAT 320GC Hydraulic Excavator 320 GC in Stock
320 GC excavator not only has excellent productivity, but also provides the following characteristics: easy-to-use technical functions, new comfortable cab, reducing fuel consumption by up to 20% and longer maintenance interval (reducing maintenance cost by up to 20%), so as to provide a durable excavator with low operating cost per hour, which is suitable for light to medium load applications.
1. High performance, low fuel consumption
In similar applications, the oil consumption of the excavator is reduced by up to 20% compared with 320d2 GC. Use the power mode to match the excavator with the operation; And automatically match the engine and hydraulic power with your excavation conditions through intelligent mode. The advanced hydraulic system not only achieves the best balance between power and efficiency, but also provides you with the control devices you need to meet your precise excavation requirements. Valve priority allows hydraulic pressure and flow to reach the level you set for rapid light to medium duty cycling. It meets the equivalent emission standard of EPA Tier 3 / EU stage IIIA / China non road country III / Brazil Mar-1. Add an auxiliary hydraulic system to do more with a variety of different ca-t tooling. Product Link ™ It is a standard accessory, so you can use visionlink as needed ® The online interface remotely monitors the operation status, position, working hours and fuel consumption of the machine.
2. Lower maintenance costs
Maintenance costs are expected to be reduced by up to 15% compared to 320e (savings based on 12000 machine hours). All routine maintenance work can be performed on the ground. Check the engine oil level quickly and safely with a new engine oil dipstick close to the ground; With a second dipstick within reach, engine oil can be filled and checked at the top of the machine. The filter service life and maintenance cycle of the excavator can be tracked through the monitor in the cab. Maintenance of the ca-t clean emissions module is not required. After 500 hours of synchronization, replace all fuel filters. The new intake air filter with pre filter is expected to last 1000 hours - 100% longer than the previous filter. The new hydraulic oil filter can provide better filtration performance, and the reverse exhaust valve can keep the oil clean when changing the filter, with a replacement interval of up to 3000 man hours and a longer service life - 50% longer than the previous filter design. The new high-efficiency electric cooling fan operates only when needed and can be reversed to eliminate debris on the core. The s · o · s sampling port simplifies maintenance work and can quickly and easily take oil samples for analysis.
3. Stable, reliable and trustworthy
The operating altitude is up to 3000 m (9840 ') without reducing the rated power. It can work in high temperature environment up to 52 ° C (125 º f) and cold start capacity as low as - 32 ° C (- 25 º f). The automatic preheating function can increase the heating rate of hydraulic oil in cold weather conditions and help to prolong the service life of components. Triple fuel filtration protects the engine from dirty diesel fuel. The grease seal between the track pin and the bushing can reduce the driving noise and prevent the entry of debris, so as to prolong the service life of the chassis system. The center track guide shield helps keep the excavator tracks aligned when the excavator is traveling and working on a slope. Tilting track frames help reduce the risk of track damage by preventing the accumulation of soil and debris.
4. You can work safely every day and go home safely
All routine maintenance points are accessible from the ground - there is no need to climb to the top of the excavator. Protect your excavator with the operator ID. Use the pin code on the monitor to enable the button start function. The standard ROPS cab meets the requirements of ISO 12117-2:2008. Thanks to the use of smaller cab columns and wide windows, the operator can obtain excellent vision whether on the inside of the ditch, in each direction of rotation or at the rear of the operator. The rear view camera is standard, and the right view camera can be selected. The right maintenance platform adopts a new design, allowing easy, safe and fast access to the upper maintenance platform; The service platform ladder uses anti slip perforated plates to prevent slipping. Handrails comply with ISO 2867:2011. The lower frame meets the lifting and tying down requirements of ISO 15818:2017.
5. Simple operation
Start the engine through the button; Use Bluetooth key card, Smartphone Application or unique operator ID function. Program each joystick button using the operator ID, including response and mode; It can also memorize temperature controlled fan and radio settings. Fast navigation is possible with a high-resolution 203 mm (8 ") standard touch screen monitor or knob control. Prevent the hydraulic hammer from overload operation. The automatic stop signal of the hydraulic hammer will continue to warn for 15 seconds, and then automatically turn off the hydraulic hammer after 30 seconds, so as to prevent the wear of tooling and excavator. Don't know how a function works or how to maintain the excavator? Just move your finger on the touch screen monitor to access the operator manual at any time. Ca-t pl161 tooling locator is a Bluetooth device that can help you find tooling and other equipment quickly and easily. The ca-t application on your mobile phone will automatically locate the device
6. Comfortable work
The comfortable cab is equipped with wide seats, which can be flexibly adjusted to suit operators of various shapes. The accessible controls are located in front of the operator to facilitate the operator to control the excavator comfortably. The standard automatic temperature control device ensures a comfortable temperature throughout the operation. Compared with previous excavator models, the advanced viscous base reduces cab vibration by up to 50%. Sufficient cab space is provided under the back of the seat, overhead and in the console to easily store your equipment. In addition, cup holder, document holder, water bottle holder and clothes hook are also provided. Standard radio USB port and Bluetooth are available ® Technology connects personal devices.
| Engine Model |
Cat C7.1 ACERT |
| Net Flywheel Power |
157.0 HP |
| Bore |
105.0 mm |
| Stroke |
135.0 mm |
| Displacement |
7.01 l |
| Gross Power - SAE J1995 |
158.0 kW |
| Net Power - SAE J1349 |
157.0 kW |
| Engine RPM - Operation |
1650.0 r/min |
| Engine RPM - Travel |
1800.0 r/min |
WEIGHTS
| Maximum Operating Weight |
22000.0 kg |
| Note (1) |
R5.7 (18'8") HD Boom, R2.9 (9'6") HD Stick, GD 1.0 m3 (1.31 yd3) bucket and 600 mm (24") TG track shoes. 4.2 mt counterweight. |
| Note (2) |
Super long Reach Boom, super long reach stick, GD 0.53 m3 (0.69 yd3) bucket and 790 mm (31") TG track shoes, 4.7mt counterweight |
SERVICE REFILL CAPACITIES
| Fuel Tank Capacity |
345.0 l |
| Cooling System |
25.0 l |
| Engine Oil |
25.0 l |
| Final Drive - Each |
5.0 l |
| Hydraulic System - Including Tank |
234.0 l |
| Hydraulic Tank |
115.0 l |
| Swing Drive - Each |
5.0 l |
SWING
| Maximum Swing Torque |
74.0 kN·m |
| Swing Speed |
11.25 r/min |
DRIVE
| Maximum Drawbar Pull |
205.0 kN |
| Maximum Travel Speed |
5.7 km/h |
| Maximum Gradeability |
35°--70% |
HYDRAULIC SYSTEM
| Main System - Maximum Flow - Total |
429.0 l/min |
| Maximum Pressure - Equipment - Normal |
35000.0 kPa |
| Maximum Pressure - Swing |
26800.0 kPa |
| Maximum Pressure - Travel |
34300.0 kPa |
WORKING RANGES - REACH BOOM - 5.7 M (18'8"); R2.9 (9'6") STICK
| Bucket Digging Force (ISO) |
3080.0 mm |
| Stick Digging Force (SAE) |
3650.0 mm |
| Maximum Cutting Height |
9370.0 mm |
| Maximum Depth Cut for 2440 mm (8'0") Level Bottom |
6550.0 mm |
| Maximum Digging Depth |
6720.0 mm |
| Maximum Loading Height |
6490.0 mm |
| Maximum Reach - Ground Level |
9860.0 mm |
| Maximum Vertical Wall Digging Depth |
5190.0 mm |
| Minimum Loading Height |
2170.0 mm |
DIMENSIONS - REACH BOOM - 5.7 M (18'8"); R2.9 (9'6") STICK
| Note (2) |
Reach boom as same dimensions as HD reach boom |
| Note (1) |
With GD 1.19 m3 (1.56 yd3) bucket and 790 mm (31") shoes. |
| Counterweight Clearance |
1050.0 mm |
| Shipping Height |
2960.0 mm |
| Shipping Length |
9530.0 mm |
| Track Gauge |
2380.0 mm |
| Track Length |
4450.0 mm |
| Transport Width - 600 mm (24 in) Shoes |
2980.0 mm |
| Transport Width - 790 mm (31 in) Shoes |
3170.0 mm |
DIMENSIONS - REACH BOOM - 5.7 M (18'8"); R2.9 (9'6") STICK
| Ground Clearance |
470.0 mm |
| Tail Swing Radius |
2830.0 mm |
Audited Supplier 
){kind=link}