CAT3508 CAT3516 High-Efficiency Industrial Power Machinery Equipment Generator Set
Product Description
AIR INLET SYSTEM
- Aftercooler core, corrosion resistant coated (air side)
- Air cleaner. Regular duty, dry, panel type with service indicators, turbocharger, jacket water aftercooled.
- Turbocharger, rear mounted
CONTROL SYSTEM
- Governor, RH, 3161 with self contained synthetic oil sump
- Mechanical speed control, without torque control
COOLING SYSTEM
- Jacket water pump, centrifugal
EXHAUST SYSTEM
FLYWHEELS AND FLYWHEEL HOUSING
- SAE No. 0 flywheel housing
FUEL SYSTEM
- Fuel filter, with service indicators, cartridge type with RH service
INSTRUMENTATION
- Engine oil pressure gauge
- Oil filter differential gauge
- Jacket water temperature gauge
LUBE SYSTEM
- Crankcase breather, top mounted
- Oil filter, cartridge type with RH service
- Fumes disposal (not installed)
MOUNTING SYSTEM
- Rails, mounting, engine length, 254 mm (10 in), industrial-type, C-channel.
- Included on selected top level engines
POWER TAKE OFF
- Accessory drive, upper RH
- Front housing, single sided
PROTECTION SYSTEM
- Safety shutoff protection, energized to shutdown
- Low oil pressure, low idle 69 kPa (10 psi); high idle 207 kPa (30 psi)
- 3161 governor solenoid energized to shutdown
STARTING SYSTEM
GENERAL
- Paint: yellow, with optional colors available at request
Detailed Photos
Product Parameters
POWER RATING
Maximum Power |
1000 hp |
Maximum Torque |
3144 lb-ft @ 1450 rpm |
Rated Speed |
1200-1800 rpm |
Minimum Power |
680 hp |
EMISSION STANDARDS
GENERAL
Engine Configuration |
V-8, 4-Stroke-Cycle Diesel |
Bore |
6.7 in |
Stroke |
7.5 in |
Displacement |
2107 in³ |
Compression Ratio |
13.0:1 |
Aspiration |
Turbocharged Aftercooled |
Rotation from Flywheel End |
Counterclockwise |
Aftertreatment |
- |
ENGINE DIMENSIONS - APPROXIMATE
Length |
84 in |
Width |
67 in |
Height |
68 in |
Weight - Net Dry - Basic Operating Engine Without Optional Attachments |
9500 lb |
Company Profile