4ton Mini Manual Road Roller Compactor Xmr403

• After-sales Service: Online Support
• Warranty: Online Support
• Type: Road Roller
• Working Method: Vibration
• Axle: Biaxial Dual-Drum
• Grinding Wheel Type: Tire Grind
• Model NO.: XMR403
• Compaction Depth: 30cm
• Engine Type: Diesel Engine
• Travel Speed: 30cm/s
• Certification: CE
• Condition: New
• Weight: 4 Ton
• Transport Package: 40hq
• Specification: 2720*1428*2819mm
• Trademark: SINOMADA
• Origin: China
• Production Capacity: 50000PCS/Year

Product Description

4ton mini manual road roller compactor XMR403

 

Performance Characteristics:

* Closed hydraulic drive system is adopted to realize stepless speed change.

* Brake system uses the neutral position braking, emergency braking and parking brake, short braking distance and high braking torque, ensuring the safety of the product.

* The front vision of machine is less than 1x0.75 m, rear view without any shade, which provides drivers with a good sight range.

* The vibration system can realize the simultaneous vibration and independent vibration of the rear and front drum, and meets the different working conditions.

* High frequency vibration and excitation force design, high working efficiency, good compaction effect.

* Vibration drum width is larger than frame width, convenient to observe compaction condition of drum edge in the construction.

* Large ground clearance and curb clearance, strong trafficabilit, good edge com- paction performance.

* This machine has also the air intake preheating function, can realize low temperature cold start.

* Changchai water-cooled turbocharged engine, in compliance with China Stage III emission requirements, allowing machine working normally in the environment at an altitude of 2000 meters and temperature above -20 ºC.
 

Item	Unit	XMR403
Operating mass	kg	4000
Static linear load (front drum/rear drum)	N/cm	157/157
Vibrational frequency	Hz	60
Amplitude	mm	0.41
Exciting force	kN	42
Vibrating drum (Diameter x width)	mm	800x1300
Theoretical gradeability	%	30
Operating speed	km/h	0~10.6
Wheel base	mm	1920
Steering angle	°	±30
Swing angle	°	±10
Minimum turning radius	mm	3062 / 4362
Minimum ground clearance	mm	348
Engine type		ZN490B
Rated power	kW	36
Rated speed	r/min	2600