| Customization: | Available |
|---|---|
| After-sales Service: | Field Maintenance and Repair Service |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The WZ30-25 is a new multi-function engineering machine which gathering the loading and excavating in the integral whole machine. It is the new generation model of the development based on the same kind product technique in domestic and international. Having adopted four wheel drive, hydraulic torque conberter, hydraulic streering system, hydrulic.
It is extensively used in the roadmaintenance, farml and developments, getting clay for making brckiln, piping builds, the cable builds, park virescence and the excavating of the road opens to dig, broking up etc.
1. Yucai engine Low noise, low exhaust gas, low west, green environmental protection, driving motive, good reliability. The spirit valve control take type brake system and parking brake system move two unite as one, when there is trouble in the gas brake system, it can make in time brake automatically, so it is more safety.
2. Humanization designs The hand handle layout reasonable, manipulating is portable; steer device, gauge dish and the chair all can be adjusted in up-down and front-back directions according to your sense, so it is comfortable. The back wheel bridge can swing up and down round the cancer, it make wheels has well cling, so the machine has good span and cross capability.
3. Optimized load work device Reasonable joint layout, dependable position limit function. Lavelling bucket automatically in unload position, lacenning labor intensity, and the work range is larger, work fore is more study and steady, the work efficiency is higher.
Optional parts: 4 in 1 bucket/ hammers/ Snow plough/ Augers
| Overall Operating Weight | 7640KG | Final Reducer | Single Stage Final Reducer |
| Transport Dimension | Rated Loader of Axle | 8.5t | |
| Overall dimension mm L*W*H | 6170×2268×3760 | Transmission System | |
| Wheel base | 2370mm | Torque Converter | |
| Min. Ground Clearance | 300mm | Model | YJ280 |
| Bucket Capacity | 1.0m3 | Type | Single-stage Three Elements |
| Breakout Force | 38KN | Max. Efficiency | 84.40% |
| Loading Lifting Capacity | 2500KG | Inlet Pressure | 1.3Mpa-1.5 Mpa |
| Bucket Dumping Height | 2770mm | Outlet Pressure | 0.25Mpa-0.3 Mpa |
| Bucket Dumping Distance | 925mm | Cooling Method | Oil-cooling Pressure Circulation |
| Digging Depth | 27mm | Gearbox | |
| Backhoe Capacity | 0.3m3 | Type | Fixed Shaft Power Transmission |
| Max. Digging Depth | 4082mm | Oil Pressure of Clutch | 1373Kpa-1569 Kpa |
| Swing Angle of Excavator Grab | 190o | Gears | Two Gears Ahead, Two Gears Astern |
| Max. Pulling Force | 39KN | Max.Speed | 22Km/h |
| Engine | Tyre | ||
| Model | YUCHAI YC4A105Z-T20 | Model | 16/70-20 |
| Type | In Line Direct injection Four-Stroke and Injection Combustion Chamber | Pressure of Front wheel | 0.22 Mpa |
| Cylinder-Inside Diameter*Stroke | 4-108×132 | Pressure of Back Wheel | 0.22 Mpa |
| Rated Power | 75KW | Brake System | |
| Rated Speed | 2200r/min | Service Brake | Air Over Oil Caliper Brake |
| Min. Fuel Consumption | ≤230g/km.h | External Type | |
| Max.Torque | ≥400N.M/1500r/min | Self-regulation | |
| Displacement | 4.8L | Self-balance | |
| Steering System | Emergency Brake | Operation Power Implementing brake | |
| Model of Steering Device | BZZ5-250 | Manual Operation Power Terminating Brake | |
| Steering Angle | ±36 o | Hydraulic System | |
| Min. turning radius | 5018mm | Digging Power of Excavator Grab | 46.5KN |
| Pressure of the system | 14Mpa | Digging Power of Dipper | 31KN |
| Axle | Bucket Lifting Time | 5.4S | |
| Manufacturer | Feicheng Axle Factory | Bucket Lowering Time | 3.1S |
| Main Transmission Type | Double Reduction | Bucket Discharge Time | 2.0S |
){kind=link}