135HP with High Efficiency Motor Grader Gr135 with High Efficiency

• After-sales Service: Free Spare Parts
• Warranty: 1 Year
• Certification: TUV, UL, ISO, RoHS, CE
• Condition: New
• Application: Railway, Mine, Farmland, Highway
• Transmission: Hydraulic
• Model NO.: GR135
• Walking Mode: Wheeled
• Type: Oversize Grader
• Total Weight (Standard): 11000kg
• Rated Power/Speed: 97(2200)Kw(R/Min)
• Forward Velocity: 5/8/13/20/30/42km/H
• Reverse Speed: 5/13/30km/H
• Engine Model: 6bt5.9-C130-2
• Transport Package: Nude
• Specification: 8015*2380*3050mm
• Trademark: XC MG
• Origin: China
• HS Code: 8565656456
• Production Capacity: 100units/Month

Product Description

135HP Motor Grader GR135  with High Efficiency

135HP Motor Grader GR135 for sale .

The GR135 motor grader is mainly used for ground leveling, ditching, slope scraping, bulldozing, scarification, snow removal for large areas such as highway, airports, farm- lands etc. It is the necessary construction machinery for national defense construction, mine construction, urban and rural road construction and water conservancy construction, farmland improvement and so on.

[Advantages and Highlights]
1. GR135 adopt Dongfeng 6BT5.9-C130- II turbocharged diesel engine, Large output torque and power reserve coeficient and low oil consumption. 2. Torque converter has big torque coefficient, wide high efficiency area. It has good combination working characteristics with engine. The transmis- sion box has six forward gears, three backward gears, with neutral start protection function, gear shift controlled by electro-hydraulic, flexible operation, shift without impact, reasonable speed ratio distribution, meet the requirements of various working conditions. 3. The rear axle adopts balanced suspension to ensure the uniform load of four wheels, which is conducive to the full use of its adhesion ability. The main drive of the rear axle is equipped with"NO - SPIN" self-locking differential. 4. The front axle is steering axle. The axle can swing from side to side. In addition to the front steering, it also uses the articulated frame, which can further reduce the turning radius. 5. The hood is structural part, well shaped with turn over function, the two sides double door is reversible, enhances the maintainability.

Specification:

Description		Unit	Parameter value
Engine model			6BT5.9-C130-2
Rated power/speed		kw(r/min)	97(2200)
Overall dimension (standard)			8015X2380X3050
Total weight (standard)		kg	11000
Tire specification			13.00-24
Ground clearance (front axle)		mm	515
Tread		mm	2020
Space of front and rear axles		mm	5780
Forward velocity		km/h	5/8/13/20/30/42
Reverse speed		km/h	5/13/30
Tractive effort f=0.75		kN	61.3
Maximum gradeability		%	20
Tire inflation pressure		kPa	300
Working system pressure		MPa	16
Transmission pressure		MPa	1.3-1.8
Maximum steering angle of front wheel			±49°
Maximum slant angle of front wheel			±17°
Maximum oscillating angle of front axle			±15°
Maximum oscillating angle of equilibrium box			±16°
Maximum steering angle of frame			±27°
Minimum turning radius		m	6.6
Scrape knife	Maximum lift height	mm	410
	Maximum cutting depth	mm	515
	Maximum tilt angle		90°
	Cutting angle		54°-90°
	Angle of revolution		360°
	Length & chord height	mm	3048x610
Coolant		L	50
Fuel tank		L	260
Engine		L	18
Transmission		L	26
Hydraulic oil		L	96
Drive axle		L	28
Balancing box		L	46

Company Information: