| Customization: | Available |
|---|---|
| After-sales Service: | Free Spare Parts |
| Warranty: | 1 Year |
|
Still deciding? Get samples of US$ 1000000/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| 1 | Hole range & depth | Drilling diameter | mm | 115-152 |
| Max hole depth | m | 35 | ||
| Drilling pipes | mm | ø102(ø 89)*5000 | ||
| Numbers of pipes | 6+1 | |||
| DTH hammer | 5"(4") | |||
| 2 | Engine | Model | QSL8.9-C360-30/L9-360C | |
| Rated power/speed | kW | 264@2100 | ||
| Max. Torque | N.m | 1500 | ||
| Fuel tank capacity | L | 760 | ||
| 3 | Compressor | Model | Atlas Copco two-stage screw type compressor | |
| FAD at normal working pressure | m3/min | 19.5 | ||
| Max. working pressure | bar | 20 | ||
| Compressor oil | L | 70 | ||
| 4 | Hydraulic system | Main pump Max. pull-down piston push | MPa | 25 |
| Main pump | L/min | 120+120 | ||
| Auxiliary pump | L/min | 70+40+40 | ||
| Hydraulic oil tank capacity | L | 400 | ||
| 5 | Electrical system | Voltage | 24V | |
| Batteries | 2×12V,180Ah | |||
| Work lights, front | 2×70W | |||
| Work lights, rear | 1×70W | |||
| Work lights, feed | 1×70W | |||
| 6 | Dust collector | Filter area | m2 | 28 |
| Suction capacity | L/s | 34 | ||
| Number of filter elements | pcs | 28 | ||
| 7 | Feed | Feed mode | Motor+chain | |
| Travel length | mm | 5550 | ||
| Length, total | mm | 9567 | ||
| Tractive pull, max | kN | 50 | ||
| Feed force, max | kN | 40 | ||
| Feed rate, max | m/min | 0.9 | ||
| 8 | Rotary head | Torque, max | kN | 4100 |
| Rotation speed | rpm | 108 | ||
| 9 | Undercarriage | Speed, max | km/h | 3 |
| Max. climbable gradient | ° | 25 | ||
| Track width | mm | 350 | ||
| Over all width | mm | 2520 | ||
| Overall length | mm | 3700 | ||
| 10 | Cab | Indoor noise | dB | ≤85 |
| Safety cabin | FOPS | |||
| Air-conditioning | Standard temperature | |||
| Seat | Adjustable | |||
| 11 | Transport dimensions(Length*Width*Height) | mm | 11200*2700*3560 | |
| 12 | Weight(standard configuration) | kg | 22000 | |
Better working condition adaptability
drivers general chassis, big ground clearance, walking speed, cross-country ability
configuration engine cold start device, good adaptability to low temperature
intelligent temperature control system, according to the environmental temperature adjust cooling power, suitable environmental temperature - 30 °+ 50 ° High-end configuration, reliable and stable;The main core components adopt the international first-line brand,Machine, large displacement plunger main pump set and multi-way valve set, the whole machine hydraulic and electrical system through Years of verification, mature, stable and reliable.
Convenient maintenance, low cost of parts;SWDE120S-3 adopts cold drawing forming propulsion beam, compared with Aluminum alloy propulsion beam, higher strength, more simple and convenient maintenance, adhering to the station maintenance design Read, all maintenance and basic parameter adjustment can be easily done on the ground, all maintenance points and Parameter adjustment is in the driver's cab side.Configuration microcomputer control system, parameters can be set on the monitor Complete directly, and with fault alarm and self-diagnosis function, assist technicians to diagnose and arrange quickly Check the fault and shorten the downtime.
Safety and environmental protection;The driver's cab is certified by FOPS against falling rocks and ROPS against turning over, and the front guardrail is installed. Can effectively protect the safety of the operator, Japan heating and cooling air conditioning, applicable to the ambient temperature
|
ITEMS
|
UNITS
|
|
Model
|
SWDE120S-3
|
|
Drilling Depth
|
28m
|
|
Drilling Diameter
|
115m
|
){kind=link}