| Customization: | Available |
|---|---|
| After-sales Service: | Provided |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The GR1003 motor grader is mainly used for ground leveling, ditching, slope scraping, bulldozing, scarification, snow removal for large areas such as highway, airports, farmlands etc. It is the necessary construction machinery for national defense construction, urban and rural road construction and water conservancy construction, farmland improvement and so on.
| Operating Weight | 7500 kg (approx) |
| Engine | Cum-mins QSB 3.9 |
| Length | 7130 mm |
| Width (inc Blade) | 3048 mm |
| Height | 3150 mm |
| Tyre Spec | 16/70-24/13-24 |
| Ground Clearance (Front Axle) | 550 mm |
| Tread | 1900 mm |
| Axle Distance (Front to Rear) | 5135 mm |
| Forward Speed (km/h) | 5/8/11/17/24/38 |
| Rearward Speed (km/h) | 2005/11/24 |
| Coolant | 50L(approx) |
| Fuel Tank | 260 L |
| Engine Oil | 18L |
| Transmission Oil | 26 L |
| Drive Axle | 28 L |
| Hydraulic Oil | 89 L |
| Traction Force f=0.75 | >39kN |
| Max Gradeability | >25% |
| Tyre Inflation Pressure | 300 kPa |
| Working System Pressure | 16 Mpa |
| Transmission Pressure | 1.3 -1.8 Mpa |
| Max Steering Angle Front Wheel | ~49 Degrees |
| Max Tilt Angle Front Wheel | ~17 Degrees |
| Max Swing Angle Front Axle | ~15 Degrees |
| Min Turning Radius | 6 metres |
| Max Lift Height | 310 mm |
| Max Shoveling Depth | 350 mm |
| Max Tilt Angle | 45 Degrees |
| Cutting Angle | 28-70 Deg |
| Slewing Angle | 120 Degrees |
| Length x Chord Height | 3048 x450 mm |
){kind=link}