| Customization: | Available |
|---|---|
| After-sales Service: | Any |
| Warranty: | 1 Year Warranty |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Model | SEM915 |
| Operating Weight | |
|---|---|
| Standard | 12,200 kg / 12,520 kg (With ROPS) |
| With Front & Rear Counterweight | 13,380 / 13,700 kg (With ROPS) |
| With Front Blade | 13,330 kg / 13,650 kg (With ROPS) |
| With Ripper+Front Blade | 14,010 kg / 14,330 kg (With ROPS) |
| Operating Specifications | |
| Top Speed, Forward | 40 kph |
| Top Speed, Reverse | 29 kph |
| Min. Turning Radius | 7,300 mm |
| Articulation Angle, Left /Right | 20° |
| Gradeability | 30° |
| Wheelbase | 5,830 mm |
| Travel Speed, Forward | 5.2 / 8.1 / 13 / 19.8 / 29 / 40 kph |
| Travel Speed, Reverse | 5.2 / 13 / 29 kph |
| Drawbar Pull | 71 kN |
| Engine | |
| Engine Manufacturer | SDEC (ShangHai Diesel) |
| Engine Model | SC7H150G2B |
| Rated Power | 110 @ 2,200 kW @ RPM |
| Max. Torque | 570 @ 1,400 Nm @ RPM |
| Emission | Tier 2 |
| Displacement | 6.5 L |
| Bore | 105 mm |
| Stroke | 124 mm |
| Number of Cylinders | 6 |
| Transmission | |
| Type | Converter, Powershift |
| Powershift Pressure | 1.3 ~ 1.7 Mpa |
| Forward / Reverse Gears | 6 Forward / 3 Reverse |
| Parking Brake | Spring Actuated, Air Released |
| Tandem Axle | |
| Model | ST18 |
| Differential | No-Spin |
| Service Brake | Caliper-Disc |
| Secondary | Dual Circuit |
| Oscillation Front Up | 15 ° |
| Oscillation Front Down | 25 ° |
| Front Axle | |
| Ground Clearance | 615 mm |
| Wheel Lean, Left / Right | ±18 ° |
| Max. Oscillation | ±16 ° |
| Steering Range, Left / Right | ±45 ° |
| Hydraulic System | |
| Circuit Type | Loading Sensing, PPPC |
| Pump Type | Variable Piston |
| Max. Pump Output | 162.8 L / min |
| Max. System Pressure | 22 Mpa |
| Standby Pressure | 2.0 ~ 2.2 MPa |
| Moldboard | |
| Blade Width, Standard | 3,059 (10') mm (Ft) |
| Blade Width, Optional | 3,669 (12') mm (Ft) |
| Moldboard Height | 580 (10' Blade) / 610 (12' Blade) mm |
| Moldboard Thickness | 20 mm |
| Throat Clearance | 112 mm |
| Float Function | Optional |
| Moldboard Sideshift, LH | 342 mm |
| Moldboard Sideshift, RH | 463 mm |
| Circle Centershift, LH | 512 mm |
| Circle Centershift, RH | 663 mm |
| Max. Blade Position Angle | 90 ° |
| Blade Tip, Forward | 40 ° |
| Blade Tip, Backward | 5 ° |
| Blade Cutting Angle | 24 ~ 69 ° |
| Max. Shoulder Reach outside of Tires, LH | 1,179 mm |
| Max. Shoulder Reach outside of Tires, RH | 1,583 mm |
| Max. Lift above Ground | 435 mm |
| Max. Cutting Depth | 750 mm |
| Service Refill Capacity | |
| Fuel Tank | 218 L |
| Engine Oil | 17.5 L |
| Coolant | 37 L |
| Transmission | 17 L |
| Differential Case | 27 L |
| Tandem Case, Each Side | 50 L |
| Circle Drive, Non Slip Clutch | 2 L |
| Circle Drive, With Slip Clutch | 7 L |
| Hydraulic Oil Tank | 55 L |
){kind=link}