Sinomada Popular Gr135 Road Motor Grader for Sale Factory Price

• After-sales Service: 1 Year Warranty
• Warranty: 1 Year Warranty
• Certification: ISO, CE
• Condition: New
• Application: Railway, Mine, Farmland, Highway
• Transmission: Hydraulic
• Model NO.: GR135
• Walking Mode: Wheeled
• Type: Medium-sized Grader
• Wheelbase (mm): 6560
• Wheel Tread (mm): 2155
• Minimum Ground Clearance (mm): 430
• Turning Radius (mm): 8200
• Maximum Gradeability (°): 20
• Height of Shovel Blade (mm): 635
• Maximum Digging Depth of Blade (mm): 500
• Engine Model: 6ctaa8.3-C215
• Rated Power/Rated Speed (Kw/Rpm): 160kw/2200rpm
• Fuel Tank (L): 340
• Working Hydraulic Fuel Tank (L): 110
• Transmission (L): 28
• Drive Axle (L): 25
• Balance Box (L): 2*23
• Transport Package: Nude Package/RO-RO/Bulk Shipment/Suitable Containe
• Specification: 9315 Width (mm) 2600 Heigh (mm) 3400
• Trademark: xc mg
• Origin: China
• Production Capacity: 300piece/Month

Product Description

SINOMADA Popular GR135 road motor grader for sale factory price

 
Product Description:

The GR135 motor grader is mainly used for ground leveling, ditching, slope scraping, bulldozing, scarification, snow removal for large areas such as highway, airports, farm- lands etc. It is the necessary construction machinery for national defense construction, mine construction, urban and rural road construction and water conservancy construction, farmland improvement and so on.
 

Advantages and Highlights:
1. GR135 adopt Dongfeng cum mins 6BT5.9-C130- II turbocharged diesel engine, Large output torque and power reserve coeficient and low oil consumption.
2. Torque converter has big torque coefficient, wide high efficiency area. It has good combination working characteristics with engine. The transmis- sion box has six forward gears, three backward gears, with neutral start protection function, gear shift controlled by electro-hydraulic, flexible operation, shift without impact, reasonable speed ratio distribution, meet the requirements of various working conditions.
3. The rear axle adopts balanced suspension to ensure the uniform load of four wheels, which is conducive to the full use of its adhesion ability. The main drive of the rear axle is equipped with"NO - SPIN" self-locking differential.
4. The front axle is steering axle. The axle can swing from side to side. In addition to the front steering, it also uses the
articulated frame, which can further reduce the turning radius.
5. The hood is structural part, well shaped with turn over function, the two sides double door is reversible, enhances the
maintainability.

 

PARAMETER

Item			GR135
Basic parameters	Engine model		6BT5.9-C130-
	Rated power/speed		97(2200r/min)
	Overall dimension (standard)		8015X2380X3050
	Total weight (standard)		11000kg
	Tire specification		13.00-24
	Ground clearance (front axle)		515mm
	Tread		2020mm
	Space of front and rear axles		5780 mm
Performance parameters	Forward velocity		5,8,13,20,30,42km/h
	Reverse speed		5,13,30km/h
	Tractive effort f=0.75		61.3kN
	Maximum gradeability		20%
	Tire inflation pressure		300kPa
	Working system pressure		16MPa
	Transmission pressure		1.3-1.8Mpa
Working parameters	Maximum steering angle of front wheel		±49°
	Maximum slant angle of front wheel		±17°
	Maximum oscillating angle of front axle		±15°
	Maximum oscillating angle of equilibrium box		±16°
	Maximum steering angle of frame		±27°
	Minimum turning radius		6.6m
	Scrape knife	Maximum lift height	410mm
		Maximum cutting depth	515mm
		Maximum tilt angle	90°
		Cutting angle	54°-90°
		Angle of revolution	360°
		Length & chord height	3660x610mm
Oil filling amount	Coolant		50L
	Fuel tank		280L
	Engine		18L
	Transmission		26L
	Hydraulic oil		96L
	Drive axle		28L
	Balancing box		46 L