Small 2.5ton Backhoe Loader WZ30-25 from Manufacturer.
The WZ30-25 is a new multi-function engineering machine which gathering the loading and excavating in the integral whole machine.
It is the new generation model of the development based on the same kind product technique in domestic and international. Having adopted four wheel drive, hydraulic torque conberter, hydraulic steering system, hydraulic.
It is extensively used in the road maintenance, farml and developments, getting clay for making brcklin, piping builds, the cable builds, park virescence and the excavating of the road opens to dig, broking up etc.
1. Yucai engine
Low noise, low exhaust gas, low west, green environmental
protection, driving motive, good reliability. The spirit valve control take type brake system and parking brake system move two unite as one, when there is trouble in the gas brake system, it can make in time brake automatically, so it is more safety.
2. Humanization designs
The hand handle layout reasonable, manipulating is portable; steer device, gauge dish and the chair all can be adjusted in up-down and front-back directions according to your sense, so it is comfortable. The back wheel bridge can swing up and down round the cancer, it make wheels has well cling, so the machine has good span and cross capability.
3. Optimized load work device
Reasonable joint layout, dependable position limit function. Lavelling bucket automatically in unload position, lacenning labor intensity, and the work range is larger, work fore is more study and steady, the work efficiency is higher.
Optional parts: 4 in 1 bucket/ hammers/ Snow plough/ Augers
Overall Operating Weight |
7640KG |
Transport Dimension |
L*W*H |
6170×2268×3760 |
Wheel base |
2370mm |
Min. Ground Clearance |
300mm |
Bucket Capacity |
1.0m3 |
Breakout Force |
58KN |
Loading Lifting Capacity |
2500KG |
Bucket Dumping Height |
2770mm |
Bucket Dumping Distance |
925mm |
Digging Depth |
27mm |
Backhoe Capacity |
0.3m3 |
Max. Digging Depth |
4082mm |
Swing Angle of Excavator Grab |
190o |
Max. Pulling Force |
65KN |
Engine |
Model |
YUCHAI YC4A105Z-T20 |
Type |
In Line Direct injection Four-Stroke and Injection Combustion Chamber |
Cylinder-Inside Diameter*Stroke |
4-108×132 |
Rated Power |
75KW |
Rated Speed |
2200r/min |
Min. Fuel Consumption |
≤230g/km.h |
Max.Torque |
≥400N.M/1500r/min |
Displacement |
4.8L |
Steering System |
Model of Steering Device |
BZZ5-250 |
Steering Angle |
±36 o |
Min. turning radius |
5018mm |
Pressure of the system |
14Mpa |
Axle |
Manufacturer |
Feicheng Axle Factory |
Main Transmission Type |
Double Reduction |