| After-sales Service: | Support |
|---|---|
| Warranty: | 1year |
| Type: | Road Roller |
| Working Method: | Steel Wheel |
| Axle: | Biaxial Three-Wheel |
| Grinding Wheel Type: | Tire Grind |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier XMR403 is a light vibratory roller with operating weight of 4 tons. This machine is suitable for surface and edge compaction construction for asphalt engineering, cement engineering and So on, also suitable for sub-base and base, sand and gravel material compaction work, is the idealist compaction machinery for all sorts of parking lot construction, road, sidewalks and bikeway compaction, as well as a variety of road maintenance engineering.
Performance Characteristics:
* Closed hydraulic drive system is adopted to realize stepless speed change.
* Brake system uses the neutral position braking, emergency braking and parking brake, short braking distance and high braking torque, ensuring the safety of the product.
* The front vision of machine is less than 1x0.75 m, rear view without any shade, which provides drivers with a good sight range.
* The vibration system can realize the simultaneous vibration and independent vibration of the rear and front drum, and meets the different working conditions.
* High frequency vibration and excitation force design, high working efficiency, good compaction effect.
* Vibration drum width is larger than frame width, convenient to observe compaction condition of drum edge in the construction.
* Large ground clearance and curb clearance, strong trafficabilit, good edge com- paction performance.
* This machine has also the air intake preheating function, can realize low temperature cold start.
* Changchai water-cooled turbocharged engine, in compliance with China Stage III emission requirements, allowing machine working normally in the environment at an altitude of 2000 meters and temperature
| Type | Unit | XMR403 |
| Operating weight | kg | 4100 |
| Static linear load(front/rear) | N/cm | 157/157 |
| Travel Speed | km/h | 0-10 |
| Theoretical agreeability | % | 30 |
| Min. turning radius(Inner/Outer) | mm | 2932/4232 |
| Min ground clearance | mm | 350 |
| Steering angle | ± ° | 30 |
| Swing angle | ±° | 10 |
| Vibration frequency | Hz | 60 |
| Vibrating system-max.pressure | Mpa | 20 |
| Steering system-max.rressure | Mpa | 14 |
| Nominal amplitude | mm | 0.41 |
| Exiting force | kN | 42 |
| Compacting width | mm | 1300 |
| Drum diameter | mm | 800 |
| Engine Model | ZN490Q | |
| Rated engine speed | r/min | 2600 |
| Rated engine power | kW | 35.5 |
| Engine oil consumption | g/kW.h | 220 |
| Overall dimensions(LxWxH) | mm | 2720x1416x2776 |
| Wheelbase | mm | 1920 |
| Water tank capacity | L | 220 |
| Fuel tank capacity | L | 66 |
| Hydraulic tank capacity | L | 52 |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}